Factory-direct steel gratings & stair treads, shipped worldwide
Banded Bar Grating
Banded bar grating from in-house lines, flat and strong.
Get a factory quote in 24 hours · Banded bar grating in 5–7 day samples
Band in-house, cut to drawings
Banding runs as a finishing step on our own lines
Certified & tested
Reports on request, MTC with every order
Samples in 5–7 days
Production in 15–25 working days
FOB Tianjin
Shipped worldwide, EXW / CIF negotiable
Edge options compared
Open Ends vs Trim Band vs Banded with Toe Plate
Banding is how a bar panel earns a finished edge. Here is how the three edge conditions compare when you order — with an honest note on what runs in our own workshop and what we source alongside it.
| Dimension | Open-End Panel | Trim-Band Banded | Banded + Toe Plate |
|---|---|---|---|
| Edge construction | Bearing-bar ends left open after cutting | Flat band bar welded across the bearing-bar ends | Full-depth band with an upstand toe plate bolted or welded on |
| Edge stiffness | Cut ends can flex under point loads | Band ties the bar ends into one stiff edge line | Stiffest edge — band plus a vertical lip above the floor line |
| Exposed-edge safety | Cut bar ends can catch gloves and clothing | Closed, smooth edge for panels people walk beside | Lip stops small parts and tools rolling off the platform |
| Panel handling | Lift and stack with care at the ends | Banded ends take slings and forks without distortion | Banded ends plus the lip give a grip point for removal |
| Best for | Panel edges buried in steel support angles | Platforms, walkways, removable covers, trench ends | Mezzanine edges, roof walkways, elevated platforms |
| Our supply | In-house — cut on our own lines | In-house — banding as a fabrication step in our line | Band in-house; toe plate sourced as a companion item |
Not sure how many faces to band? Send your drawings — we will spec it inside the 24-hour quote.
How banded panels are made
From Bar Panel to Banded Edge
1 · Form the bar panel
Welded or press-locked panels come off our own lines to your bar size and spacing — then every panel is cut to the exact length on your drawing.
2 · Band the edges
A flat band bar is fitted across the cut bearing-bar ends and welded — on the two ends, or on all four faces when side edges stay exposed.
3 · Toe plate, then galvanize
Where specified, a toe plate rises above the floor line — a companion item we source and supply with the panels. Then hot-dip galvanizing to ASTM A123 / ISO 1461, 2–3 days at our partner kettle near the mill.
Why order banded
Why Buyers Order Banded Bar Grating Panels
Flat-top banded edges
The band bar sits flush with the bearing bars, so the walking surface stays one flat plane — flat and strong, straight off our in-house lines, with no proud edge to trip on.
High-load banded panels
Bands tie the cut bar ends together, so loads reaching the edge of the panel meet a closed line of steel, not loose bar tips — a real gain on wheel-traffic and heavy-duty floors.
Samples and small trial orders
Check the band fit and finish before you commit — banded samples ship in 5–7 days, small MOQ trial orders are welcome, and full orders follow in 15–25 working days.
Applications
Where Banded Bar Grating Ships
Any bar panel with an edge people or wheels can reach is a candidate for banding. Four typical duties we quote every week:
Platform edges
Banded ends on mezzanine and plant platforms where the floor edge is exposed.
Walkways & catwalks
Narrow panels people walk beside — smooth banded edges instead of cut bar tips.
Trench & pit covers
Removable covers lifted by hooks — bands keep the ends square and liftable.
Stair treads
Treads ship with end plates as standard — banding logic already built into the tread line.
Specifications
Banded Bar Grating Specifications
| Parameter | Range |
|---|---|
| Base panel | Welded or press-locked bar grating |
| Bearing bar | 20×3 mm to 100×8 mm, plain or serrated |
| Bar spacing | 30 / 40 / 60 mm centers; closer mesh on press-locked |
| Band bar | Flat bar, section matched to your bearing-bar height |
| Band faces | 2 or 4 edges, exactly per your drawing |
| Toe plate | Optional upstand on the band — sourced companion item |
| Panel size | Up to 1.25 m wide × 6 m long |
| Materials | Q235B carbon steel · SS304 / SS316 stainless |
| Surface | Black or hot-dip galvanized (ASTM A123 / ISO 1461) |
Materials & test documents
Every heat of Q235B, SS304 or SS316 enters production with its mill test certificate verified at goods-in — the first of our five QC stages. Banded panels leave with documentation, not promises:
- Mill test certificate to EN 10204 Type 3.1
- Factory inspection report with every shipment
- Declaration of Conformity prepared per order destination
Standards & compliance
Produced to Recognized Standards — Documents on Request
ANSI / NAAMM MBG 531
Banded panels produced to MBG 531 reference practice, with weld and band joints inspected on our five-stage QC plan.
ASTM A123 / ISO 1461 HDG
Galvanized coating thickness — band bar included — checked by sampling on every galvanized batch before release.
CE & SGS tested
Certified & tested, reports on request — we show documents you can verify, not a certificate wall.
How to order
Ordering Banded Panels: Dimensions and Band Faces
Send dimensions and band faces
Panel length and width, bar size and spacing, and how many faces to band — or just photos and a sketch. Drawing review is free.
Quote within 24 hours
Itemized, FOB Tianjin as standard — EXW or CIF on request. The reviewed drawing comes back with the band layout marked.
Samples in 5–7 days, production in 15–25
Working days after drawing confirmation, hot-dip galvanizing included. Installation drawings and fixing layout ship with the order.
What to include in your banded panel enquiry
- Panel dimensions and span direction of the bearing bars
- Band faces: 2 ends, or all 4 edges for exposed sides
- Toe plate yes / no, and on which edges
- Material and finish: Q235B / SS304 / SS316, black or HDG
Riveted bar grating enquiries are assessed per project — welded and press-locked banded panels are produced on our own lines.
Factory-direct quote
Get a Factory Quote
Send panel dimensions and band faces — an itemized quote lands within 24 hours, free drawing review included.
- Five-stage QC, from MTC verification at goods-in to final inspection
- DoC, MTC EN 10204 3.1 and inspection report with every order
- Factory audits welcome — see the lines before you commit
Prefer to talk? WhatsApp us or sales@dtsteelladder.com
Request your quote
Five fields — we do the rest.
FAQ
Frequently Asked Questions
What does banded mean on bar grating?
Banded means the cut ends of the bearing bars are closed by a flat band bar welded across the panel edge. It protects the cut bar ends, stiffens the edge line and gives the panel a safe, finished edge to handle. On our welded and press-locked panels, banding is done in-house as a finishing step before galvanizing.
How many edges of a bar panel should be banded?
You choose the band faces with your dimensions. Most platform and walkway panels are banded on the two ends only; panels with exposed side edges, removable covers or nearby traffic are often banded on all four faces. Tell us the number of banded faces in your quote request and we will confirm the layout on the reviewed drawing.
Is banded bar grating the same as riveted bar grating?
No. Banded describes the closed edge — a flat band bar welded across the bearing-bar ends — and it can be applied to welded or press-locked panels. Riveted bar grating is a different forming method in which the bars are riveted rather than welded; riveted enquiries are assessed per project, while banded welded and press-locked panels are produced on our own lines.
Related pages
Related Grating Pages
Banded Grating
Banding fundamentals — band types and why edges matter.
View page →Welded Steel Grating
The electro-forged base panel most banded orders build on.
View page →Press-Welded Grating
Press-welded panels, banded the same way in our workshop.
View page →Welded Grating
The full welded line — galvanized, serrated and custom panels.
View page →Electro-Forged Grating
The process that forms the panel before banding starts.
View page →Bearing Bar Grating
Bar sizes and spacing — pick the section your band matches.
View page →